promex EXPERT 300/300 LC

Material: Aluminium
The EXPERT directly at the extrusion line when it comes to highest precision at a minimum of measurement time.

promex EXPERT 300/300 LC

promex EXPERT enables measurements directly at the press and is predestined for easy handling and fast measurement results in combination with high tolerance requirements.
The system is completely insensitive against dirt, vibrations and temperature – by this fast and corrective interventions into the current production are possible to avoid rejects.
Requirements for the sample preparation: burr-free
Top feature: Thermal break measurement

Technical specifications:

Modelpromex EXPERT
300/300 LC ²,⁴
promex EXPERT
300/500 LC ²,⁴
promex EXPERT
300/700 LC ²,⁴
Measuring field size300 x 300 mm300 x 500 mm300 x 700 mm
Measuring accuracy± 20 μm ≤ 220 x 180 mm
± 40 μm > 220 x 180 mm
± 20 μm ≤ 220 x 180 mm
± 40 μm > 220 x 180 mm
± 20 μm ≤ 220 x 180 mm
± 40 μm > 220 x 180 mm
² Sample length: 6,5 - 8 cm | ³ Measuring time: 2 - 5 sec.
F* = 2 - 5 sec. + Handling time | ⁴ Measuring time: 3 - 20 sec.

Operating and storage environment:
Temperature range (without air conditioner): Operation: 10°C - 40°C (50°F - 104°F); Storage: -40°C - 65°C (-40°F -149°F)
Relative humidity (maximum): Operation: 20 % - 80 % (non-condensing); Storage: 5% - 95% (non-condensing)

Repeatable measuring accuracy based on Measurement System Capability Type1 Cg / Cgk-Study
according to DIN EN ISO 9001/10012, QS.9000, VDA 6,1 GUM and ISO 14253-1
Facebook
Twitter
LinkedIn
WhatsApp